 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Z01 Standard 1 A Triacs Main Features Symbol IT(RMS) VDRM/VRRM IGT (Q1) Value 1 600 to 800 3 to 25 Unit G A2 A A1 V mA A2 G Description The Z01 series is suitable for general purpose AC switching applications. They can be found in applications such as home appliances (electrovalve, pump, door lock, small lamp control), fan speed controllers,... Different gate current sensitivities are available, allowing optimized performances when controlled directly from microcontrollers. A1 TO-92 Z01xxA A2 G A1 A2 SOT-223 Z01xxN Order Codes Part Number Z01xxA Z01xxN Marking See Ordering information on page 7 Table 1. Symbol IT(RMS) Absolute maximum ratings Parameter RMS on-state current (full sine wave) Non repetitive surge peak on-state current (full cycle, Tj initial = 25 C) It Value for fusing Critical rate of rise of on-state current IG = 2 x IGT , tr 100 ns Peak gate current Average gate power dissipation Storage junction temperature range Operating junction temperature range SOT-223 TO-92 F = 50 Hz F = 60 Hz tp = 10 ms F = 120 Hz tp = 20 s Tj = 125 C Tj = 125 C Tj = 125 C Ttab = 90 C TL = 50 C t = 20 ms t = 16.7 ms 8 A 8.5 0.35 20 1 1 - 40 to + 150 - 40 to + 125 A s A/s A W C Value 1 Unit A ITSM I t dI/dt IGM PG(AV) Tstg Tj December 2006 Rev 8 1/9 www.st.com 9 Characteristcs Z01 1 Characteristcs Table 2. Symbol Electrical characteristics (Tj = 25 C, unless otherwise specified) Z01 Test Conditions Quadrant 03 07 5 7 1.3 0.2 7 7 MAX II MIN MIN 15 10 0.5 20 20 1 25 50 2 50 100 5 V/s V/s 10 10 10 15 25 25 mA 09 10 10 10 25 mA 5 MAX MIN MX. I - III - IV 25 V V mA I - II - III VD = 12 V RL = 30 MAX IV ALL VD = VDRM RL = 3.3 k Tj = 125 C IT = 50 mA IG = 1.2 IGT ALL 3 Unit IGT (1) VGT VGD IH (2) IL dV/dt (2) (dV/dt)c (2) VD = 67% VDRM gate open Tj = 110 C (dI/dt)c = 0.44 A/ms Tj = 110 C 1. minimum IGT is guaranteed at 5% of IGT max. 2. for both polarities of A2 referenced to A1. Table 3. Symbol VTM(1) Vto (1) Rd (1) Static characteristics Test Conditions ITM = 1.4 A tp = 380 s Tj = 25 C Tj = 125 C Tj = 125 C Tj = 25 C Tj = 125 C MAX. MAX. MAX. MAX. 0.5 mA Value 1.56 0.95 400 5 Unit V V m A Threshold voltage Dynamic resistance VDRM = VRRM IDRM IRRM 1. for both polarities of A2 referenced to A1. Table 4. Symbol Rth(j-t) Rth(j-I) Rth(j-a) 1. Thermal resistances Parameter Junction to tab (AC) Junction to lead (AC) Junction to ambient TO-92 150 SOT-223 TO-92 S(1) = 5 cm SOT-223 Value 25 C/W 60 60 C/W Unit S = Copper surface under tab. 2/9 Z01 Characteristcs Figure 1. Maximum power dissipation versus RMS on-state current (full cycle) Figure 2. RMS on-state current versus lead (TO-92) or tab (SOT-223) temperature (full cycle) P(W) 1.50 1.25 1.00 0.75 0.50 0.25 IT(RMS)(A) 1.2 Rth(j-a) = Rth(j-t) (SOT-223) 1.0 0.8 Rth(j-a) = Rth(j-l) (TO-92) 0.6 0.4 0.2 IT(RMS)(A) 0.00 0.0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 Tl or Ttab(C) 0.0 0 25 50 75 100 125 Figure 3. RMS on-state current versus ambient temperature (full cycle) Figure 4. Relative variation of thermal impedance versus pulse duration IT(RMS)(A) 1.2 1.0 0.8 0.6 0.4 0.2 Rth(j-a) = 150C/W (TO-92) K=[Zth(j-a)/Rth(j-a)] 1.00 Rth(j-a) = 60C/W (SOT-223) Z01xxA 0.10 Z01xxN Tamb (C) 0.0 0 25 50 75 100 125 0.01 1E-3 1E-2 1E-1 tp(s) 1E+0 1E+1 1E+2 5E+2 Figure 5. Relative variation of gate trigger current, holding current and latching current versus junction temperature (typical values) Figure 6. Surge peak on-state current versus number of cycles IGT, IH, IL [Tj] / IGT, IH, IL [Tj=25C] 2.5 ITSM (A) 9 8 t=20ms 2.0 7 6 Non repetitive Tj initial = 25C One cycle 1.5 IGT 5 4 3 Repetitive Tamb = 25C 1.0 IH & IL 0.5 2 0.0 -40 -20 0 20 Tj (C) 40 60 80 100 120 140 1 0 1 Number of cycles 10 100 1000 3/9 Characteristcs Z01 Figure 7. Non-repetitive surge peak on-state current for a sinusoidal pulse with width tp < 10 ms and corresponding value of I2t Figure 8. On-state characteristics (maximum values) ITSM (A), I2t (A2s) 100.0 Tj initial = 25C dI/dt limitation: 20A/s ITSM ITM(A) 10.0 10.0 Tj = Tjmax. 1.0 1.0 I2t Tj = 25C Tj=max. Vt0=0.95 V Rd=400 m 0.1 0.01 tp (ms) 0.1 VTM (V) 1.00 10.00 0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 0.10 Figure 9. Relative variation of critical rate Figure 10. Relative variation of critical rate of of decrease of main current versus decrease of main current versus (dV/dt)c (typical values) junction temperature (dI/dt)c [Tj] / (dI/dt)c [Tj Specified] 6 5 4 3 2 Z0103 Z0107 Z0109 Z0110 (dI/dt)c [(dV/dt)c] / Specified (dI/dt)c 2.6 2.4 2.2 2.0 1.8 1.6 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0.0 0.1 1 (dV/dt)c (V/s) 0 1.0 10.0 100.0 Tj (C) 0 25 50 75 100 125 Figure 11. SOT-223 Thermal resistance junction to ambient versus copper surface under tab (printed circuit board FR4, copper thickness: 35 m) Rth(j-a)(C/W) 130 120 110 100 90 80 70 60 50 40 30 20 10 0 0.0 0.5 1.0 1.5 2.0 S(cm) 2.5 3.0 3.5 4.0 4.5 5.0 4/9 Z01 Ordering information scheme 2 Ordering information scheme Z 01 03 M A Triac series Current 01 = 1A Sensitivity 03 = 3mA 07 = 5mA 09 = 10mA 10 = 25mA Voltage M = 600V S = 700V N = 800V Package A = TO-92 N = SOT-223 Packing mode 1AA2 = TO-92 Bulk (preferred) 2AL2 = TO-92 Ammopack 5AL2 = TO-92 Tape & reel 5AA4 = SOT-223 Tape & reel [BLANK] 1AA2 Table 5. Product Selector Voltage Sensitivity 600 V 700 V 800 V 3 mA 3 mA X X X X X X X X X X X X X X X X X X X X X X 3 mA 3 mA 3 mA 3 mA 5 mA 5 mA 5 mA 5 mA 5 mA 5 mA 10 mA 10 mA 10 mA 10 mA 10 mA 10 mA 25 mA 25 mA 25 mA 25 mA 25 mA 25 mA Standard Standard Standard Standard Standard Standard Standard Standard Standard Standard Standard Standard Standard Standard Standard Standard Standard Standard Standard Standard Standard Standard Standard Standard TO-92 SOT-223 TO-92 SOT-223 TO-92 SOT-223 TO-92 SOT-223 TO-92 SOT-223 TO-92 SOT-223 TO-92 SOT-223 TO-92 SOT-223 TO-92 SOT-223 TO-92 SOT-223 TO-92 SOT-223 TO-92 SOT-223 X X Type Package Part Number Z0103MA Z0103MN Z0103SA Z0103SN Z0103NA Z0103NN Z0107MA Z0107MN Z0107SA Z0107SN Z0107NA Z0107NN Z0109MA Z0109MN Z0109SA Z0109SN Z0109NA Z0109NN Z0110MA Z0110MN Z0110SA Z0110SN Z0110NA Z0110NN 5/9 Packaging information Z01 3 Packaging information Table 6. SOT-223 Dimensions Dimensions REF. A A1 e1 B V c Millimeters Min. Typ. Max. 1.80 0.02 0.60 2.90 0.24 6.30 0.70 3.00 0.26 6.50 2.3 4.6 3.30 6.70 3.50 7.00 3.70 7.30 0.80 3.10 0.32 6.70 Min. Inches Typ. Max. 0.071 0.001 0.024 0.027 0.031 0.114 0.118 0.122 0.009 0.010 0.013 0.248 0.256 0.264 0.090 0.181 0.130 0.138 0.146 0.264 0.276 0.287 A A1 B B1 c D B1 4 H E 1 2 3 D e e1 e E H V 10 max Figure 12. SOT-223 Footprint dimensions (in millimeters) 3.25 1.32 5.16 7.80 1.32 2.30 0.95 6/9 Z01 Table 7. TO-92 Dimensions Ordering information DIMENSIONS REF. Millimeters Min. A a B C Inches Min. Typ. 0.053 Max. Typ. 1.35 Max. A B C 4.70 2.54 4.40 12.70 3.70 0.50 0.173 0.500 0.100 0.185 F D E D E F a 0.146 0.019 4 Ordering information Ordering type(1) Z01xxyA 1AA2 Z01xxyA 2AL2 Z01xxyA 5AL2 Z0103yN 5AA4 Z0107yN 5AA4 Z0109yN 5AA4 1. xx = sensitivity, y = voltage Marking(1) Z01xxyA Z01xxyA Z01xxyA Z3y Z7y Z9y Package TO-92 TO-92 TO-92 SOT-223 SOT-223 SOT-223 Weight 0.2 g 0.2 g 0.2 g 0.12 g 0.12 g 0.12 g Base quantity 2500 2000 2000 1000 1000 1000 Delivery mode Bulk Ammopack Tape and reel Tape and reel Tape and reel Tape and reel 7/9 Revision History Z01 5 Revision History Date Oct-2001 10-Feb-2005 09-May-2005 Revision 4 5 6 Last update. Package: TO-92 tape and reel delivery mode 5AL2 added. Table 4 on page 2: typo. mistake corrected 1. (dV/dt)c instead of (dI/dt)c 2. V/s unit instead of A/ms Reformatted to current standard. Table 2 on page 2: Typo corrected. Values for IGT split into two separate rows. Table 2: modified test conditions for (dV/dt)c. Changed "ambient" to "lead or tab" in Figure 2. Description of Changes 21-Apr-2006 10-Oct-2006 7 8 8/9 Z01 Please Read Carefully: Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries ("ST") reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST's terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein. UNLESS OTHERWISE SET FORTH IN ST'S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER'S OWN RISK. Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST. ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners. (c) 2006 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com 9/9 |
Price & Availability of Z0109NN5AA4
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |